Configure System Attributes | 39
3.
Commit the Configuration | 40
4.
Enter Configuration Mode
1. Verify that the network device is powered on.
2. Log in as the root user. There is no password.
Amnesiac <ttyd0>
login: root
3. Start the CLI.
root@% cli
root>
4. Enter configuration mode.
root> configure
Entering configuration mode.
[edit]
root#
Configure User Accounts and Passwords
For information about using an encrypted password or an SSH public key string (DSA or RSA), see Configuring
the Root Password and user.
1. Add a password to the root administration user account. Enter a cleartext password.
[edit]
root@host# set system root-authentication plain-text-password
New password: password
Retype new password: password
38