Operation In The Entry Keypad Mode - Satel INT-SCR-BL Manual

INT-SCR-BL
Information on the use of the partition keypad with proximity card reader can be found in the user
manual of the control panels.
The partition keypad with proximity card reader can be programmed by means of the LCD keypad
S
(
ERVICE MODE
or a computer with the
reader offers all the functions available for the partition keypad mode. Support of the proximity cards
should only be additionally taken into account. Presenting the card to the reader is recognized by the
expander as entering the code, confirmed with the key. Holding up the card for approx. 3 sec. is
recognized as entering the code, confirmed with the

7. Operation in the Entry Keypad Mode

In the entry keypad, only the LED designated
that the countdown of delay activation time is running (disarming has no effect on the LED blinking).
Information on the use of the entry keypad can be found in the user manual of the control panels.
The entry keypad can be programmed by means of the LCD keypad (
S H
TRUCTURE ARDWARE
D X
the program. Described below are settings and options available for programming.
LOAD
Name – option to give an individual (16-character) name to the module. This option can be accessed
in the LCD keypad as follows:
N
expander selection.
AMES
Partition assignment of the keypad to a partition selected from the list. The delay activation will apply
to the zones with reaction type
Master users / Users – this function defines master users / users authorized to use the given
keypad.
Alarm 3 incorrect codes – entering codes / reading cards unknown to the control panel three times
triggers alarm
Control BI output – the keypad accepts the
Control MONO output – the keypad accepts the
Guard round control – entering the guard code ended with
holding up the card will be recorded as completion of the round.
Signaling
Delay activation sign. – when the option is enabled, the keypad will signal with beeps the
countdown of delay unblocking time.
Access code signaling (hardware) – enabling this option will activate the signaling of code entry /
card reading acknowledgement, which is independent of the control panel. The option is useful
in expanded alarm systems, because of a considerable time lag between entering the
code / reading the card and generating the audible signal by the control panel.
Confirming – this option defines the way of communication between the control panel and the
keypad user:
No – the function of keypad operation acknowledgement is disabled.
Sound – the keypad generates beeps as described in the user manual for the alarm control panel.
Backlight – the audible signaling will be replaced by the blinking keypad illumination as described
in the user manual for the alarm control panel.
Backlight – defines the mode of keypad illumination
No – keypad backlighting disabled.
Auto – keypad backlighting goes on automatically on pressing any key.
Note: Automatic keypad illumination is ON for approx. 40 seconds from the moment of its
activation or from the last press of any key.
Permanent – keypad backlighting is permanently "ON".
S H
TRUCTURE ARDWARE
D X
program. The operating mode of partition keypad with proximity card
LOAD
E
XPANDERS
S
ERVICE MODE
3. I
NTERIOR DELAYED
SATEL
E
XPANDERS
key.
. is used for signaling. Blinking of the LED informs
S
expander selection) or a computer with
ETTINGS
S
TRUCTURE
in this partition.
BI
type of codes.
OUTPUTS
MONO
OUTPUTS
S
expander selection)
ETTINGS
S
H E
ARDWARE
type of codes.
or key as well as presenting or
7
ERVICE MODE
XPANDERS