Restoring Factory Setting On The 'Station - Siemens FS720 Commissioning, Maintenance, Troubleshooting

24.9
Building Technologies
Fire Safety

Restoring factory setting on the 'Station'

There are the following ways in which to restore the factory setting on the 'Station':
Via the menu on the display
With the 'S32' button
NOTICE
Restoring factory setting on the 'Station'
The configuration of the 'Station' is deleted!
Save the configuration data for the 'Station' before restoring the factory
setting.
Via the menu on the display
1. Press <MENU>.
You are prompted to enter a PIN.
2. Enter a valid PIN and confirm with <ok>.
The 'User successfully logged in' message is displayed.
The main menu is displayed.
3. Select the 'Topology' > 'Hardware tree' > 'Station' menu items.
4. Press the 'More Options' softkey and select 'Execute commands'.
5. Select the 'Factory reset' command.
The 'Station' restarts.
After a few minutes, the 'Buzzer' sounds twice.
6. Press <Acknowledge> on the Person Machine Interface to switch off the
'Buzzer'. Do not perform any more actions on the 'Station' until the 'Buzzer' has
sounded for the second time.
7. Enter the date and time. To do this, select the 'Settings/administration' >
'System commands' > 'Set system time' menu items.
Restoring factory setting on the 'Station'
Repair 24
113
A6V10210416_f_en_--
14.01.2013