Description; Modules - Siemens SIMATIC NET RUGGEDCOM RSG2488F Installation Manual

Introduction
1.2 Description
•
1.2

Description

The RUGGEDCOM RSG2488F features various ports, controls and indicator LEDs on
the front panel for connecting, configuring and troubleshooting the device.
1
2
1
2
3
4
5
6
7
8
9
10
11
12
Figure 1.1
Power Status LEDs
RS-232 Console Port
Management Port
Alarm Indicator LED
2
Conformal coated printed circuit boards (optional)
4
Front
Rear
Power Modules
Power Status LEDs
RS-232 Serial Console Port (DB9)
Management Port
Alarm Indicator LED
Access Plate
Port Status LEDs
Line Modules
Power Supply Terminal Block
Chassis Ground Terminal
RUGGEDCOM RSG2488F
3
4
10
Indicates the status of the power modules.
LED
I The power module is receiving power
O The power module is supplying power
The serial console port is for interfacing directly with the device and
accessing initial management functions. For information about con-
necting to the device via the serial console port, refer to
ing to the Device (Page 19)".
The 10/100Base-T Ethernet management port is for system man-
agement that is out-of-band from the switch fabric. For information
about connecting to the device via the 10/100Base-T Ethernet man-
agement port, refer to "Connecting to the Device (Page
The alarm indicator LED illuminates when an alarm condition exists.
5 6 7 9
8
Description
"Connect-
19)".
RUGGEDCOM RSG2488F
Installation Manual, 11/2019, C79000-G8976-1351-05
11
11 12