Siemens SIMATIC NET RUGGEDCOM RSG2488F Installation Manual page 28

•
•
Security hazard – risk of unauthorized access and/or exploitation
Make sure to remove the microSD card before decommissioning the device or send-
ing the device to a third-party.
To insert or remove a microSD card, do the following:
1.
2.
3.
4.
5.
RUGGEDCOM RSG2488F
Installation Manual, 11/2019, C79000-G8976-1351-05
Do not expose the microSD card to large magnetic or static electric fields
Do not bend or drop the microSD card
CAUTION
Power down the device.
Unscrew the retention screws and remove the access plate.
2
1
Access Plate
1
MicroSD Card
2
Figure 3.3 Inserting/Removing a MicroSD Card
Without touching the contacts on the card, insert or remove the microSD card.
Install the access plate and finger-tighten the retention screws.
Power up the device.
Device Management
3.3 Inserting/Removing the MicroSD Card
21