Tiger CNH T6010-80 Mounting And Operating Instructions page 72

4WD FRONT AXLE STOPS
In order to prevent interferences with mounted equipment, the front axle on a
4WD tractor with wheels larger than 13.6 X R24 will have to be limited. On each
side of the front axle the following procedure must be followed.
The existing spacer and capscrews will need to be removed and a new Tiger
Spacer (p/n 06401546) will need to be added. Sandwich the Tiger Spacer
between the tractor and the existing spacer. The capscrews which were removed
will need to be replaced by two longer Tiger Capscrews (p/n 06530105).
After adding the Tiger Spacer to each side, double-check the adjustment by
oscillating and turning the tires fully for interference
ASSEMBLY
Assembly Section 2-40
.
(ASM-NH-0077)