Tiger CNH T6010-80 Mounting And Operating Instructions page 136

MAINTENANCE
DRIVE SHAFT YOKE, U-JOINT STUB SHAFT
WIth engine stopped, inject Lithium-Complex
extreme pressure grease confirming to NLGI2-ISO
320 specifications into universal joints and slip yoke
until grease appears at the seal. Grease them daily
or every 8 hours.
GREASING THE BOOM SWIVEL
Locate the zerks on the main swivel boss (if
applicable), main boom pivot boss (if applicable)
and on both ends of the boom swivel cylinder.
Inject Lithium-Complex Extreme Pressure grease
conforming to NLGI2-ISO 320 specification until
grease begins to protrude from ends.
Boom Maintenance Section 4-16
©2011 Alamo Group Inc.