Tiger CNH T6010-80 Mounting And Operating Instructions page 71

2WD FRONT AXLE ADJUSTMENT
In order to prevent interferences with mounted equipment, the front axle on a
2WD T6000 tractor will have to be adjusteed outwards to show 2 holes on each
side (see illustration below). Double check the wheel spacing after adjustment by
oscillating and turning the tires fully for interference
4WD FRONT WHEEL ADJUSTMENT
In order to prevent interferences with mounted equipment, the front wheels on
a 4WD T6000 tractor will have to be adjusted to be approximately 68" center to
center distance (see illustration below). For tractors with mounted loaders, that
distance should be approximately 76". Double check the wheel spacing after
adjustment by oscillating and turning the tires fully for interference
ASSEMBLY
Assembly Section 2-39
..
(ASM-NH-0068)
..
(ASM-NH-0069)