Table of Contents
Advertisement
To set a camera preset with the QuickPad:
1. Select the camera you want to preset by pressing the SEND button for that
camera.
With the QuickPad, you can set presets for your site only.
2. Press NEAR END in the ADJUST section of the QuickPad.
3. Adjust the camera by pressing POINT and ZOOM (or by using the manual
controls on the camera, if it has them).
Keep doing this until the camera shows the image exactly the way you want
it.
4. Press SET.
5. Press a preset number button or SHOW ROOM to store that camera position.
You can also press the blue button or
to store a preset position for that button.
Using Camera Presets
Once youÕve set your camera presets, you can simply press the appropriate
button and the camera moves to the preset position.
If you have a Look-At-Me Button, you can move the camera to a preset position
by pressing the blue button or the
Button.
To move a camera to a preset position:
Press a preset number button or SHOW ROOM.
The camera then moves to the preset view.
40
SHOW ROOM
button on the Look-At-Me-
SHOW ROOM
on the Look-At-Me-Button
Advertisement
Table of Contents
