Installation For Windows Nt (Version 3.51); Installing Cip Client Drivers - Adaptec 5ANA-940 User Manual

Installation for Windows NT (version 3.51)

The procedures below describe installation of ATM, Classical IP
(CIP), and Lan Emulation (LANE) client device drivers for a
Windows NT ATM server using version 3.51. To ensure correct
device configuration, install these drivers in the following order:
Classical IP (CIP) client drivers
LANE drivers
CIP ARP server (optional drivers, purchased separately)

Installing CIP Client Drivers

To install CIP client drivers
1
In the Program Manager's Main group window, select the
Control Panel icon.
2
Select the Network icon.
3
Select Add Adapter.
4
Select <Other> Requires disk from manufacturer from the
Network Adapter Card drop-down list, and then select
Continue.
5
Insert Device Driver for Windows NT Disk 1 in the diskette drive.
6
Type the drive letter of the diskette drive that contains Device
Driver for Windows NT Disk 1, and then select OK.
7
Select Adaptec Inc.ATM ANA-59x0 Adapter(CIP), and then
select OK.
Installing ATM Version 2.0x Drivers for Windows NT
5-13