Utp And Stp Interface (Ana-5910/5930 - Adaptec 5ANA-940 User Manual

ANA-5910/5930/5940 User's Guide

UTP and STP Interface (ANA-5910/5930)

Connector
Oper. Distance
ANA-5910 cable
ANA-5930 cable
Pin contacts are listed here for the STP, UTP-3, UTP-4, and UTP-5
:
cables
1
ANA-5910 /
IBM Defacto Pinout Standard
ATM
Workstation/ ATM
ANA-5910 Network/
Signal Switch Signal
Unused Unused
Unused Unused
Transmit A Receive A
Receive A Transmit A
Receive B Transmit B
Transmit B Receive B
Unused Unused
Unused Unused
1
If your ATM switch is ATM Forum pinout compliant, create a cable to convert to the
pinouts; see Figure on page A-7.
A-6
RJ-45 shielded style interface
100 meters
EIA/TIA UTP-3, 4, 5: 100 ohm
STP type 1, 1A, 2, 2A: 150 ohm
Data rate: 25.6 Mbits/sec
Line code: NRZI
UTP-5: 100 ohm
Data rate: 155.52 Mbits/sec
Line code: NRZ
ATM Forum Pinout Standard
ATM
Workstation/
ANA-5930
Pin Contact Signal
1 Transmit A
2 Transmit B
3 Unused
4 Unused
5 Unused
6 Unused
7 Receive A
8 Receive B
ANA-5930/
ATM
Network/
Switch Signal
Receive A
Receive B
Unused
Unused
Unused
Unused
Transmit A
Transmit B