Using Device Drivers And Utilities; Stopping Atm Drivers; Starting Atm Drivers - Adaptec 5ANA-940 User Manual

Using Device Drivers and Utilities

Stopping ATM Drivers

To stop ATM driver:
Note:
PVCs and other configuration information not stored
in the database files are lost when you stop the drivers.
1
If your path is not set up, change to the directory where you
installed the software.
2
Stop the driver using the appropriate command below and in
the following order:
alanecnfg -s
acipcnfg -s
aarpcnfg -s
aatmcnfg -s

Starting ATM Drivers

To start the ATM driver:
1
In the Program Manager's Main group window, select the
MS-DOS Command Prompt icon.
The Command Prompt window appears.
2
Change to the directory where you installed the software.
Installing ATM Version 2.0x Drivers for Windows NT
stops the alane.sys driver
stops the Classical IP portion of the
atmo.sys driver
stops the aarp.sys driver (only needed on
the ATMARP server)
stops the atmo.sys driver
5-25