System Requirements; For Windows Nt Systems; For Windows 2000 Systems; Cable And Gbic Requirements - Adaptec 9110G User Reference

Adaptec Fibre Card 9110G User's Reference

System Requirements

The minimum system requirements for the Adaptec Fibre Card
9110G are:

For Windows NT Systems

A Pentium or higher system that is PCI 2.1 compliant
Windows NT
Minimum recommended system memory is 32 MB

For Windows 2000 Systems

A Pentium or higher system that is PCI 2.1 compliant
Windows 2000
Minimum recommended system memory is 64 MB

Cable and GBIC Requirements

A Fibre Channel cable is required. To use the external connector, the
cable should match the GBIC module used. The Adaptec Fibre Card
9110G provides an additional internal connector. To use the internal
connector, a Fibre Channel copper cable that has a HSSDC on one
end and a connector interface for the internal Fibre Channel storage
subsystem on the other end is required. For a list of cable assemblies,
see Fibre Channel Cable Assemblies and GBIC on page 22.
4
®
4.0 installed with at least service pack 4
®
installed