Advertisement
Insert the AFW-4300 into the PCI expansion slot. Press down
S
4
TEP
firmly until the card clicks into place; then replace the slot cover
screw. When installed properly, the card should appear level with
the expansion slot, as shown below.
N
OTE
considerable force might be required to insert the card.
C
OMPLETING THE
Once the AFW-4300 is installed in your system complete the
following steps.
Windows Installation
After physically installing the card into the PCI slot and replacing
S
1
TEP
the slot cover screw, replace the cover on your computer and then
reattach the power cord. Once this is done, power up the
computer.
During the operating system startup, the card will automatically
S
2
TEP
be detected and Windows will load an embedded driver for the
card. If your system prompts you to restart the computer, do so.
Depending on the tightness of the PCI slot,
I
NSTALLATION
3
Advertisement
