Locating Files And Directories - Adaptec 5ANA-940 User Manual

ANA-5910/5930/5940 User's Guide
ndd.exe
The ndd.exe utility is used for displaying Classical IP and ATMARP
server information on the atmoconsole . Open an atmoconsole
window (see aatmcons.exe on page 5-29), then execute the ndd
command with the appropriate options at a separate MS-DOS
command prompt window. The following is the syntax for using
this utility:
NDD Usage: ndd <option <values>>
-r <other switches> for ARP server statistics
-a for arp cache entries
-v for vcc entries
-l for lis configuration details

Locating Files and Directories

The following table lists the files that are copied onto your hard
drive when you install the Adaptec ATM Classical IP (CIP) and/or
LAN Emulation (LANE) software. The specific files that are installed
depend on which driver you installed.
The following files are copied and subdirectories created:
Default Directory
Structure
\ \
systemroot system32
\
systemroot \system32
\drivers
5-30
File Description
aatmsnmpd.dll SNMP agent driver
ATM configuration driver
adptaatm.dll
oemnadx.inf
ATM OEM installation file
oemnxdx.inf
ARP OEM installation file
adptalan.dll
LANE configuration driver
aatmsrv.exe
aarp.sys ARP base driver
atmo.sys
ATM driver; includes CIP
alane.sys
LANE driver