REMKO WLT EC Series Operating And Installation Instructions page 23

"MODE" key
Press the "MODE" key to change to another mode.
A total of 5 modes are available:
1. COOL/HEAT - Automatic mode, automatic
selection of cooling or heating mode
2. COOL - Cooling mode, mainly used in summer
3. DRY - Dehumidification mode, summer or winter
mode
4. FAN - Recirculation mode, no cooling or heating
5. HEAT - Heating mode, preselect. Winter mode
Fig. 11: Mode key
MODE
MODE
MODE
MODE
MODE MODE
MODE MODE
"AUTO" mode
Press the "MODE" key once or repeatedly to
switch to automatic mode. In this mode, the con-
troller automatically selects "COOL" or "HEAT"
mode depending on the temperature. The temper-
ature is then maintained at the set value. The pre-
requisite is that sufficient cooling or heating
medium at an appropriate temperature is available.
The "FAN" should be set to "AUTO".
KÜHLEN oder HEIZEN
COOLING or HEATING
1) 1 )
Fig. 12: "AUTO" mode
1): The target temperature is below the room tem-
perature
2): The target temperature is above the room tem-
perature
MODE
MODE
TEMP
TEMP
2) 2)
23