MKT 240 Scope of Supply Safety Notices 1 MKT 240 air conditioner 1 Infrared remote control 2 Batteries (type AAA/1.5 V) Before delivery, this device was sub- Protect all electrical lines of the ■ 1 Air outlet hose with connection...
Device Structure observing the proper polarity. a wide curve radius (Fig. 7). Observe the marking inside The air outlet hose may not be ■ Delivery the compartment (Fig. 6). extended. Check whether the plug of the ■ All devices are carefully packed condensate drain spout has Pivot-hung windows ■...
MKT 240 Operation The device is operated comfortably using Point the infrared transmitter of the no objects between the remote control ■ the control panel on the device or the in- remote control at the infrared receiver and the device (reach of approx. 5 m).
Page 5
“Cool“ mode “Dehumidify“ mode “Timer“ time delay (4) “Timer“ time delay (4) 1. Attach the air outlet hose to the wall 1. Attach the air outlet hose to the wall You can turn the device on and off bushing or the window. bushing or the window.
MKT 240 Cooled circulation Fan (circulation air) air in the room air in the room Functional principle of Humidity is removed Evaporator Evaporator the cooling process from the air and drips as condensate from the Air inlet (circulation air) with air filter...
Trouble Shooting The device is not functioning and the The device is not cooling properly. DANGER DANGER control panel remains dark. Check the mode: the “Cool“ LED must ■ Make sure that be lit. Contact your dealer or ■ · the mains plug is properly inserted; For an optimum cooling capacity, close contractual partner if the ■...
“Fan“ mode to dry the sur- included in delivery must be completely face of the evaporator plate fins. In this filled out and sent to REMKO GmbH & way, the residual moisture is removed CO KG immediately after purchasing or from the device and you can prevent commissioning.
Fig. 19 Installation diagram Sealing cap for the wall bushing Trap Telescopic pipe Protective grille Environment and Recycling Installation Instructions for the Wall Dispose of the packaging in an eco- Create a core hole in the outside wall Mount the protection grill on the out- ■...