Our guarantee becomes null and void if the unit is used, set up or maintained improperly, or if modifications are made to the supplied unit without our prior consent. Subject to alterations! Portable Air Conditioner REMKO RKL 290 / REMKO RKL 350 Contents Contents Page Page...
Do not transport the unit during operation. Extensive tests have been conducted on the material, functionality and quality of the REMKO portable air Do not place the unit on its side. conditioner to ensure that it is a high-performance unit with a long service life.
The unit has been designed for automatic, universal, smooth air dehumidification. Its compact dimensions The RKL 290-350 air conditioner comes with an infra- red remote control and an air outlet hose with a flat make it easy to transport and set up in all rooms.
Page 6
Control Panel 5 “TIMER” button 1 “I / 0” button This button is used to automatically activate the unit The unit is switched on or off with button 1. to switch on and off. When the unit is off, the Timer 2 “MODE”...
Page 7
Infrared Remote Control Functions 12 “DRAIN WATER” display All settings can also be made using an infrared remote This light indicates that the floating switch of the control. A description of the button functions can be internal tank has switched off unit operation. The found in the “Control Panel”...
Expelling the warm air Prior to Initial Operation During cooling mode, the unit generates warm air. This air must be expelled from the room to retain the cooling The unit is set up in the desired location with the air out- effect.
Initial Operation Information about timer mode (timer clock) Prior to initial operation, the air intake and outlet open- The timer function is reset by pressing the “I/O” but- ings must be inspected for foreign bodies and the air in- ton. take filter for dirt.
Maintenance and Service Cleaning the Filter Regular maintenance and observance of some basic The unit is equipped with two air intake filters. These principles are required to ensure a long service life and can be removed from the back of the unit. The filters to keep the unit functioning properly.
Troubleshooting This unit has been designed using state-of-the-art manufacturing processes and it has been tested repeatedly to ensure that it is working properly. However, should problems occur, refer to the following list. Problem Possible cause Check Remedy The unit does not start or Are all other electrical compo- Check current and wait for the Power failure.
For the guarantee to be valid, the purchaser or his cus- tomer must completely fill out the “guarantee certificate” Only authorised personnel may come into contact with enclosed with all units and send it back to REMKO GmbH the cold cycle. This ensures that refrigerant does not & Co. KG...
Page 14
Installation Diagram of the Wall-Lead Through Back pressure flap Safety guard Sealing cap min. 400 mm Telescope pipe Installation instructions 1. Create a core hole in the outer wall (maximum wall 4. Attach the safety guard to the outer side of the wall thickness 480 mm) with a diameter of at least 135 with 4 screws.
Page 16
REMKO GmbH & Co. KG Air-conditioning and heating technology D-32791 Lage Im Seelenkamp 12 • D-32777 Lage P.O. Box 1827 • Phone +49 5232 606-0 +49 5232 606-260 E-mail info@remko.de Internet www.remko.de...
Need help?
Do you have a question about the RKL 290 and is the answer not in the manual?
Questions and answers