Martin Maxxyz User Manual page 91

To clear the "Cyan" attribute from only the odd numbered MAC 2K's, we would use the following
keystrokes:
1 Select the group "2k Profile-2" from the Group touch screen.
2 Select the "Color" LED key on the programmer
3 Press and hold the "Clear" key on the keypad
4 Press the hard key in the programmer that is directly below the "Cyan" label in the Programmer
Touch Screen.
The programmer screen will then look like this:
You can see that the cyan attribute on the odd Mac 2k's is now set to null. This is sometimes
referred to as "knocking out."
F F
IXTURE ANNING
Fixture fanning is similar to "Focus Fanning" (page 54) except that it does not require the use of
the 3d visualizer. In it's place, the four trackbelts on the right hand side of the console are used to
control the various aspects of the fan.
When a number of fixtures are selected and the "Fan" LCD button is pressed, the programmer
touch screen will display the "Fan Display" on the right hand side of the "Channels" window.
The Programmer Window 91