Martin Maxxyz User Manual page 162

There are now three actions that can be taken: Restore Cuelist, Load Cue, or Autoload Cue
Restore Cuelist
Load Cue
Autoload Cue
S
E T T I N G S
Pressing the "Settings" button pulls up a page that can be used to adjust the global settings for
some of the timing parameters used in cuelists.
Changing these values by pressing the "+" or "-" buttons will allow you to change the release
timings of all cuelists. The "Back/Save" and "Back/Cancel" buttons will return you to the Cuelist
Directory and either save the new settings or revert to the previous settings without accepting
any changes made.
P B
LAYBACK
The Playback Button Page presents an alternative way of displaying information to be used
instead of or in conjunction with the playback faders. While the detailed level of information that
is readily accessible in a playback fader is missing, the rapid access to a large number of cuelists
presents you with the ability to make very quick changes. There are 99 pages of buttons, each
(by default) containing 100 buttons in a 10 by 10 arrangement.
162
After selecting a cuelist, pressing this button will place the cuelist
back into the Cuelist Display.
With a cuelist selected, you can then select a specific cue and by
pressing this button, load it into the programmer. Note that only
non-tracked values are loaded with this command (i.e. tracking is not
employed). To load a different cue, select the cue and then press
"Load Cue" again.
When highlighted, the programmer will be automatically loaded with
the contents of that cue. To load a different cue, simply press the
desired cue; there is no need to press "Load Cue" each time. As with
the "Load Cue" function, only non-tracked values are loaded.
P
UTTON AGE
Maxxyz