Martin Maxxyz User Manual page 125

We can see that all the color attributes have been set to a fade time of 0 seconds by looking at
the programmer window:
6 Press Record Cue xx Merge Enter to complete.
S A
E T T I N G A N
An attribute's delay time is the amount of time between when the cue starts, and when the
attribute begins it's fade. The attribute delay time is set in much the same way as the attribute or
attribute group fade time. We will program a cue such that the odd numbered MAC 2k's will move
2.5 seconds after the even MAC 2k's by using the following procedure:
1 Select the desired cuelist.
2 Press the "M2kP E2" group button to select the fixtures
3 Press the "Pan/Tilt" programmer controls LCD button.
4 Press the Delay LCD key in the Playback Command.
D
T T R I B U T E E L A Y
Working With Cues
T
I M E
125