Martin Maxxyz User Manual page 130

5 Select the Timing Values option from the Clear Options pop-up window. Also deselect Base
Values and Effects Values and apply any other filters desired.
6 Press Enter
7 Press Update Update to record
S C
E T T I N G U E
The trigger for a cue determines what event is required for that trigger to execute. The most
basic is the "Go" trigger which merely requires pressing the appropriate "Go" button. Maxxyz
supports two other trigger types, "Wait" and "Follow" both of which will automatically advance
cues down the cuelist.
S
ETTING A
A cue with a wait time will automatically execute x seconds after the previous cue is executed.
That is to say that if a cue is created with a wait time of 7 seconds, it will automatically begin 7
seconds after the previous cue starts.
To set a Wait trigger, use the following procedure:
1 Confirm that Edit Mode is unlocked.
2 Select the desired cuelist by pressing the appropriate LCD playback button.
3 Press the current trigger value (Go, Follow, or Wait) of the desired cue.
4 The following pop-up window will appear:
5 Press the Wait button.
6 The command line will now read "Cue Trigger Cue 1 Wait"
7 Enter the desired Wait time (in seconds)
8 Press Enter to complete the command
S
ETTING A
A cue with a follow time will automatically execute x seconds after the previous cue is complete.
That is to say that if a cue is created with a follow time of 7 seconds, it will automatically begin 7
seconds after the previous cue finishes.
The procedure to set a follow trigger is the same as that used in setting a wait trigger except that
in step 5, press the Follow button.
T
R I G G E R S
W T
AIT RIGGER
F T
OLLOW RIGGER
Working With Cues 130