The Camera Bar; The Display Mode Bar - Martin Maxxyz User Manual

the "Select Camera" pull down menu. Pressing this will open a pull down menu that lists all
camera views that were set in Martin Show Designer.
T C
H E A M E R A
From this toolbar you can determine (from left to right) whether you are looking at your scene
from the front, back, left side, right side, top, bottom or in three-dimensions. Note that selecting a
specific camera view as described above, will change to that view regardless of the Camera Bar
selection
T D
H E I S P L A Y
The Display Mode is used to determine whether objects and beams are displayed as
wireframes or solid objects. By default, all objects and beams are set to their highest
(and more realistic) settings. However, in very large shows, it may be desirable to reduce
the resolution by choosing a wireframe mode as this will allow for faster refreshing of the
visualization display.
44
B
A R
M B
O D E A R
Maxxyz