Martin Maxxyz User Manual page 90

F C
ILTER ATEGORY
In many ways, this category is akin to the Preset page filters. Using these filters, you can
determine which attribute groups will be acted on in the programmer. By default, all of these
filters are "on.".
Intensity Focus
P/T
Color
Gobo
Zoom/Prism
Effects Speed
Framing
Defilter
D C
EFAULT
This is a rather unique category in that it doesn't do any filtering per se, but it does allow you to
change the default filters used in the Clear Options window.
Set
Reset
C I
L E A R I N G N D I V I D U A L
While the Clear Options window is quite useful and effective in clearing out attribute groups, it is
also possible to clear individual attributes using the Clear key. Please refer to the screen below:
90
Only those attributes which would be found in the Dim/Focus attribute
group will be recorded when this is selected.
Only those attributes which would be found in the Pan Tilt attribute group
will be recorded when this is selected.
Only those attributes which would be found in the Color attribute group
will be recorded when this is selected.
Only those attributes which would be found in the Gobo attribute group
will be recorded when this is selected.
Only those attributes which would be found in the Zoom/Prism attribute
group will be recorded when this is selected.
Only those attributes which would be found in the Effects/Speed attribute
group will be recorded when this is selected.
Only those attributes which would be found in the Framing attribute group
will be recorded when this is selected.
Pressing this button will clear all selected filters from the Filter Category
ATEGORY
Pressing this button will cause the Maxxyz console to "remember"
any of the filters you have applied so that the next time you press
Clear, those same filters will be selected. Note: there is no feedback
when you press this button (it doesn't change color).
Pressing this button will cause the Clear Options window to return to
it's default filter setting.
A
T T R I B U T E S
Maxxyz