Siemens SIMATIC PG 760 PII Manual page 73

Option
"PCI IRQ line"
Figure 5-15 "PCI Configuration" Submenu
Disabled 1
AutoSelect
3 to 15
Assignment of the PCI IRQ line to the PCI slots.
Slot 1
PCI IRQ Line 1
PCI IRQ Line 2
PCI IRQ Line 3
PCI IRQ Line 4
Slot 2
PCI IRQ Line 1
PCI IRQ Line 2
PCI IRQ Line 3
PCI IRQ Line 4
PG 760 PII Programming Device
C79000-G7076-C766-01
PhoenixBIOS Setup Utility.
Main Advanced Security
PCI Configuration
PCI Device, Slot #1
PCI Device, Slot #2
Disabled
PCI Device, Slot #3
Auto Select
3
PCI/PNP ISA Resource Exclusion
4
5
7
PCI IRQ line 1:
9
PCI IRQ line 2:
10
PCI IRQ line 3:
11
12
PCI IRQ line 4:
14
15
F1 Help Select Item + / –
ESC Exit Select Menu Enter Select
No interrupt possible for the selected PCI IRQ line
Plug & Play mechanism of the BIOS selects free interrupts and
assigns them to the PCI module.
The selected PCI IRQ line is assigned to the selected interrupt.
You should only select this setting if it is specifically required in
the documentation for your PCI module or application.
Configuring the PG 760 PII
Power Exit
Item Specific Help
PCI devices can use
hardware interrupts cal-
led IRQs. A PCI device
cannot use IRQs already
in use by ISA or EISA de-
vices. Use 'Auto' only if
no ISA or EISA legacy
cards are installed
Change Values F9
Sub-Menu F10
PCI module interrupt
INT - A
INT - B
INT - C
INT - D
PCI module interrupt
INT - B
INT - C
INT - D
INT - A
Setup Defaults
Save and Exit
5-19