Table of Contents
Advertisement
Connecting the
If you want to connect your PG 760 PII to another programming device, you
PG 760 PII to Other
can plug the appropriate connecting cable into the V.24 or TTY interface
Programming
port. You will find more detailed information on the connecting cables listed
Devices
below in Chapter 7.
V.24 interface
TTY interface
Note
1)
connect the cable the right way around (see Figure 3-6).
Figure 3-6
Note
When connecting two programming devices via the TTY interface, you must
deactivate the COM1/TTY interface by changing the switch position (see
Chapter 4). When the PG 760 PII leaves the factory, this interface is always
set to active.
PG 760 PII Programming Device
C79000-G7076-C766-01
Interface
Link
PG 7xx with PG 7xx
PG 7xx with PG 6xx
When connecting the programming devices in series, make sure you
Adapter
PG 7XX
6ES5 731-6AG00
Direction of Connection: Adapter - Connecting Cable
Installing and Operating the PG 760 PII
Connecting Cable
6ES5 733-5BD20
Series connection of
6ES5 731-6AG00
6ES5 733-2xxx0
and
1)
6ES5 731-6AG00
Connecting cable
Active
Passive
6ES5 733-2xxx0
Adapter
PG 6XX
3-9
Advertisement
Table of Contents
