Siemens SIMATIC PG 760 PII Manual page 71

Option "PCI
The following submenu appears when you select the option "PCI Devices" in
Devices" the advanced menu:
Figure 5-13 "PCI Devices, Slot #1" Submenu
Option ROM
Scan:
Enable Master:
Latency Timer
PG 760 PII Programming Device
C79000-G7076-C766-01
PhoenixBIOS Setup Utility.
Main Advanced Security
PCI Devices, Slot #1
Option Rom Scan [Enabled]
Enable Master: [Enabled]
Latency Timer: [0040h]
F1 Help Select Item + / –
ESC Exit Select Menu Enter Select
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Default]
[0020H
to
00E0H]
Configuring the PG 760 PII
Power Exit
Item Specific Help
Initialize device
expansion rom
Change Values F9
Sub-Menu F10
The ROM option of the PCI module (if
present) is enabled
The ROM option of a PCI module is disabled.
This slot can assume the PCI master function
This slot can only work as a PCI slave.
The number of active PCI clock cycles of the
master modules are determined by the module.
You can use these settings to set the maximum
number of active PCI clock cycles to the
chosen value.
Setup Defaults
Save and Exit
5-17