Siemens SIMATIC PG 760 PII Manual page 52

PG 760 PII Expansions
Installing Hard
You can install a further 3.5 inch IDE hard disk drive in the disk drive block
Disk Drives at the at the back of your PG 760 PII. Provisions for the necessary wiring have
Back of the Unit
already been made. Only a disk drive recommended by the manufacturer
may be installed as a second disk drive. For the relevant drives and their
settings, please refer to the Product Information Bulletin.
Figure 4-8
4-14
Disk drive block
Slot for an Additional Disk Drive
Locking screws
PG 760 PII Programming Device
C79000-G7076-C766-01