Siemens SIMATIC PG 760 PII Manual page 67

Option "Hardware
The following submenu appears when you select the option "Hardware
Options" Options" in the main menu:
Figure 5-9
The parameters of the interfaces present on the basic module are set here.
PCI-MPI/DP
Programming
interface
Sound Chip
Trackball / PS/2
mouse
PG 760 PII Programming Device
C79000-G7076-C766-01
PhoenixBIOS Setup-Utility
Main Advanced Security
Hardware Options
[Enabled]
PCI - MPI / DP:
Programming interface: [Enabled]
[Enabled]
Sound Chip:
Trackball / PS/2 Mouse:: [External]
F1 Help Select Item + / –
ESC Exit Select Menu Enter Select
"Hardware Options" Submenu
Entry
Enables the CP5611-compatible MPI/DP interface. The resources
are managed by the BIOS PCI Plug & Play mechanism.
Enables or disables the interface for S7 memory cards. This
interface occupies the I/O address range 300h - 31fh.
Enables or disables the sound chips of the mother board - if active,
IRQ 5 is occupied.
Internal
External
Disabled
Configuring the PG 760 PII
Power Exit
Item Specific Help
Enable or disable the
Plug&Play PCI - Multi Point
User Interface (MPI / DP)
Change Values F9 Setup Defaults
Sub-Menu F10 Save and Exit
Function
The PS/2 interface is active.
The IRQ 12 is occupied.
The PS/2 interface is active. The IRQ 12 is
occupied. The keyboard trackball is disabled.
The PS/2 interface is inactive,
IRQ12 is available.
5-13