Siemens SIMATIC PG 760 PII Manual page 86

Hardware Information
I/O and Memory
Below are listed the I/O and memory assignments of a number of expansion
Assignments modules set in the factory. Please consult the relevant hardware descriptions,
since you can also select other settings.
Table 7-4 I/O and Memory Assignments
03B0 H-03DF H
0340 H-0347 H
4010 H-4017 H
03E0 H-03E3 H
-
4040 H-4061 H
0330 H-0333 H
*) Default; you can select IRQ 10, 11, 12 or 15, depending on the module.
Caution
!
Malfunction!
** IRQ 12 must not be selected with the PG 760 if it is occupied by the PS/2
mouse.
IRQ 15 must not be selected with the PG 760 if it is occupied by the
CD-ROM drive (secondary IDE).
7-6
I/O Address Memory Address
000A 0000 H-000C 7FFF H
0000 0484 H-0000 0487 H
000D 0000 H-000d FFFF H
000D 0000 H-000D FFFF H
-
000D C000 H-000D FFFF H
Module HW DMA
Inter- Chan-
rupt nel
HIGRAPH IRQ 11* -
IRQ 9
CP141 (H1) IRQ 10* DRQ 6
CP1413 (H1) IRQ 10* -
CP5410 (L2) IRQ 12* -
DF20 IRQ 10* -
SCSI IRQ 12* DRQ 5
(AHA1540B)
PG 760 PII Programming Device
C79000-G7076-C766-01