Cd-Rom Drive - Siemens SIMATIC PG 760 PII Manual

Hide thumbs Also See for SIMATIC PG 760 PII:
Table of Contents

Advertisement

7.5

CD-ROM Drive

CD-ROM Drive
The CD-ROM drive enables you to easily update the already installed STEP 5,
STEP 7 software and Windows 95. The CD-ROM drive is connected to the
secondary IDE interface.
Part Names and
Functions
1
Phones Jack
This jack is used to connect a set of headphones. Please use headphones with a
stereo mini-jack plug.
2
Volume Control
This control is used to adjust the headphone volume. This control has no effect
on the left and right audio outputs from the LINE OUT connector on the back
of the unit.
3
BUSY Indicator
This indicator lights while data is being read.
4
CD Tray
This tray prevents dust from getting inside the CD-ROM reader and should
remain closed. If your programming device is not switched on you can manually
push the tray and close the door of your CD-ROM drive.
5
Emergency
Use a paper clip or any other device to open the CD-ROM tray if the electrical
Eject Hole
eject is disabled by software or if power failure occurs (See "Emergency Eject"
for details).
6
Open/
This button is pressed to open or close the CD tray when the power of your
Close Button
programming device is on.
PG 760 PII Programming Device
C79000-G7076-C766-01
1
2
3
4
Hardware Information
5
6
7-19

Advertisement

Table of Contents
loading

Table of Contents