The Advanced Menu - Siemens SIMATIC PG 760 PII Manual

Configuring the PG 760 PII
5.1.2

The Advanced Menu

Menu Structure
Figure 5-10 "Advanced" Menu
Settings in the Plug & Play O/S
Advanced Menu
Reset
Configuration
Data
Diskette
controller
Local Bus IDE
adapter
Large Disk
Access Mode
5-14
PhoenixBIOS Setup-Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced Security
Warning!
Setting items on this menu to incorrect va-
lues
may cause your system to malfunction.
PCI Devices
Plug & Play O/S [No]
Reset Configuration Data [No]
Diskette controller: [Enabled]
Local Bus IDE adapter: [Primary and Secondary]
Large Disk Acces Mode: [DOS]
VGA Interrupt: [Enabled]
F1 Help Select Item + / –
ESC Exit Select Menu Enter Select
Plug & Play means that fitted modules are automatically
recognized and installed provided they support Plug & Play
functions.
[No] The BIOS handles the complete Plug & Play
facilities
[Yes] The operating system handles some of the Plug &
Play functions
[Yes] All previous functions under Plug & Play are
deleted, and the configuration is retriggered the next
time the system is loaded. The entry is then set to
[No]. System components which have no Plug &
Play facilities must be entered manually.
[No] The system components with Plug & Play facilities
are initialized the next time the system is loaded.
Enable or disable the floppy controller of the basic module.
[Primary]
[Secondary]
[Primary and Secondary]
[Disabled]
[DOS] The drive tables are designed according to DOS
drive access operations compatible with enhanced
IDE.
[OTHER] The tables are not adapted.
Power Exit
Item Specific Help
Change Values F9
Sub-Menu F10
One IDE interface for up to two
drives.
Two IDE interfaces for up to four
drives.
No local IDE interface
PG 760 PII Programming Device
C79000-G7076-C766-01
Setup Defaults
Previous Values