Multipoint Interface (Mpi/Dp) - Siemens SIMATIC PG 760 PII Manual

Hide thumbs Also See for SIMATIC PG 760 PII:
Table of Contents

Advertisement

Installing and Operating the PG 760 PII
3.5

Multipoint Interface (MPI/DP)

Connecting an S7
You can connect your PG 760 PII to a SIMATIC S7 programmable logic
Programmable
controller using the CP5611-compatible floating MPI/DP interface. The MPI
Controller via the
cable (5 m long) for connection to SIMATIC S7 CPUs is supplied with the
MPI/DP Interface
PG 760 PII.
Figure 3-8
Connect your PG 760 PII to a SIMATIC S7 programmable controller as
follows:
1. Switch off the PG 760 PII.
2. Plug the connecting cable into the MPI/DP port.
Caution
!
Risk of damage to the PG 760 PII!
Before plugging in the cables, you must discharge your body's electrostatic
charge by briefly touching a grounded object (ESD guideline).
Coupling
Via the MPI/DP interface, you can couple your programming devices to
The supplied MPI cable can be used for connection to MPI networks with
transmission rates up to 187.5 Kbps.
3-12
MPI/DP interface
Connection via Multipoint Interface
MPI networks (S7-300 and S7-400) or
PROFIBUS DP networks (DP components).
6ES7901-0BF00-0AA0
MPI connecting cable
PG 760 PII Programming Device
C79000-G7076-C766-01

Advertisement

Table of Contents
loading

Table of Contents