Table of Contents
Advertisement
Unpacking and Setting Up the PG 760 PII
2.5
Transport
Carrying the
Despite the robust design of the PG 760 PII, its internal components are
PG 760 PII
sensitive to severe vibrations or jolts. When moving the PG 760 PII, you
must therefore make sure that it is protected from severe mechanical forces.
Use the original packing material if you have to ship the PG 760 PII from
one location to another.
Caution
!
Risk of damage!
When transporting the unit cold weather, when it may be submitted to
extreme variations in temprature, make sure that there is no moisture
(condensation) on or in the unit.
The unit must be allowed to reach room temperature slowly before you
switch it on. If condensation has formed, you should wait approximately 12
hours before switching on the unit.
2-12
PG 760 PII Programming Device
C79000-G7076-C766-01
Advertisement
Table of Contents
