Connecting I/O Devices - Siemens SIMATIC PG 760 PII Manual

Installing and Operating the PG 760 PII
3.2

Connecting I/O Devices

Connecting a PS/2
Connect the keyboard as follows:
Keyboard
1. Switch off your PG 760 PII.
2. Plug in the PS/2 keyboard connector.
Using a Mouse You can connect both a PS/2 and a serial mouse to the PG 760 PII. When the
PG 760 PII is supplied, the mouse driver for the PS/2 mouse is already
loaded.
Note
A PS/2 mouse and a serial mouse cannot be operated at the same time.
Connecting a PS/2 Connect a PS/2 mouse or another pointing device to the mouse connector.
Mouse
Figure 3-2
Connect the mouse as follows:
1. Switch off your PG 760 PII.
2. Plug the cable of the PS/2 mouse or another pointing device into the
3. Switch on your PG 760 PII again.
3-4
Port for
PS/2 keyboard
Port for
PS/2 mouse
COM2 port for
serial mouse
Connections for Keyboard, PS/2 Mouse and Serial Mouse
mouse connector.
PG 760 PII Programming Device
C79000-G7076-C766-01