Table of Contents
Advertisement
DURADRIVE Drive Controllers
3.4
General Information
DOK-DURADR-HDC01.1****-PR02-EN-P
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Safety Instructions for Electric Servo Drives
• Rexroth Indramat GmbH is not liable for damages resulting from
failure to observe the warnings given in these documentation.
• Order operating, maintenance and safety instructions in your language
before starting up the machine. If you find that due to a translation
error you can not completely understand the documentation for your
product, please ask your supplier to clarify.
• Proper and correct transport, storage, assembly and installation as
well as care in operation and maintenance are prerequisites for
optimal and safe operation of this equipment.
• Trained and qualified personnel in electrical equipment:
Only trained and qualified personnel may work on this equipment or
within its proximity. Personnel are qualified if they have sufficient
knowledge of the assembly, installation and operation of the product
as well as an understanding of all warnings and precautionary
measures noted in these instructions.
Furthermore, they should be trained, instructed and qualified to switch
electrical circuits and equipment on and off, to ground them and to
mark them according to the requirements of safe work practices and
common sense. They must have adequate safety equipment and be
trained in first aid.
• Only use spare parts and accessories approved by the manufacturer.
• Follow all safety regulations and requirements for the specific
application as practiced in the country of use.
• The equipment is designed for installation on commercial machinery.
European countries: see directive 89/392/EEC (machine guideline).
• The ambient conditions given in the product documentation must be
observed.
• Use only safety features that are clearly and explicitly approved in the
Project Planning manual.
For example, the following areas of use are not allowed: Construction
cranes, Elevators used for people or freight, Devices and vehicles to
transport people, Medical applications, Refinery plants, the transport
of hazardous goods, Radioactive or nuclear applications, Applications
sensitive to high frequency, mining,
protection equipment (also in a machine).
• Start-up is only permitted once it is sure that the machine, in which the
product is installed, complies with the requirements of national safety
regulations and safety specifications of the application.
• Operation is only permitted if the national EMC regulations for the
application are met.
The instructions for installation in accordance with EMC requirements
can be found in the INDRAMAT document "EMC in Drive and Control
Systems".
The machine builder is responsible for compliance with the limiting
values as prescribed in the national regulations and specific EMC
regulations for the application.
European countries: see Directive 89/336/EEC (EMC Guideline).
U.S.A.: See National Electrical Codes (NEC), National Electrical
Manufacturers Association (NEMA), and local building codes. The user of
this equipment must consult the above noted items at all times.
• Technical data, connections and operational conditions are specified in
the product documentation and must be followed at all times.
food processing, Control of
3-3
Advertisement
Table of Contents
