Ergotron StyleView LiFe Power Upgrade System Installation Manual page 15

NEO-FLEX
7
a
Attach SOCI to worksurface, then route cable down and plug into power module.
8
Attach power strip.
Power strip should be used to plug your equipment into.
888-83-072-G-01 rev. D• 01/15
b
Replace power module cover.
WARNING! Connecting electrical equipment
to the outlet effectively leads to creating
a medical system and the result can be a
reduced level of safety.
Leave enough slack in
cable to allow full range
of motion.
Leave enough slack in
cable to allow full range
of motion.
15 of 17