Front Panel Connectors - BEC MX-1200 Quick Start Manual

Front Panel - Connectors
PORTS
(Optional)
LTE 1
I (Main/GPS/Aux)
Antenna
Connectors
(Optional)
LTE 2
II (Main/GPS/Aux)
Antenna
Connectors
Gigabit
III LAN Ethernet
(1 - 4)
IV USB Ports
V Power
MX-100U as Primary LTE Connectivity
SMA female connectors
Manually screw the mobile and/or GPS antennas tight to the female connectors for
mobile connection 1
MX-1200 Embedded as Secondary LTE Connectivity
SMA female connectors
Manually screw the 3G/4G and/or GPS antennas tight to the female connectors for
mobile connection 2
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when
connecting to a PC or an office/home network of 10Mbps /100Mbps /1000Mbps
* LAN 1/EWAN 1 & LAN 2/EWAN 2
Connect to a Fiber/ Cable/ xDSL Modem with using a RJ-45 cable for broadband
connectivity
Note: LAN1 and/or LAN2 automatically becomes an EWAN port when EWAN internet
interface is configured in the management GUI
The USB can support setup for storage/file sharing. Connect an external USB dongle /
hard drive for storage
Connect the supplied Power cable to this jack port
MEANING
Quick Start Guide
2