Hardware Installation - BEC MX-1200 Quick Start Manual

Hardware Installation

1. Power Connection
There are two power sources to power on the MX-1200. (1) DC power adapter or (2) Vehicle
Electrical System
A. Using the Supplied DC Power Adapter
Attach the miniFIT-to-DC-Power-Cable to the 4-pin connector of the MX-1200. Then plug in
the supplied power adapter to the wall and the power plug to the DC jack of the power cable to
power ON the MX-1200.
MiniFIT to DC
Power Cable
B. Using Vehicle Electrical System
Attach the vehicle hardware power cable to the MX-1200 and connect the wire leads of the
power cable to the vehicle's electric system
Vehicle
Power Cable
Quick Start Guide
6