Rear Panel Connectors - BEC 7700N User Manual

Rear Panel Connectors

PORT
1. Power
2. Power ON/OFF
3. WPS
4. Wireless On/Off
5. LAN Ethernet
(1~4)
6. DSL
7. Reset
BEC 7700N User Manual
Device Description – Rear Panel Connectors
Connect the supplied Power Adapter to this port.
Power ON/OFF switch
Push WPS button to trigger Wi-Fi Protected Setup function.
Press the button to enable / disable the Wi-Fi connection
Connect PCs, Laptops or any other office/home LAN devices with the supplied RJ-45 Ethernet
cable (Cat-5 or Cat-5e) to any of the four (4) LAN ports.
Note: Port 4 is a LAN / WAN Configurable Port.
: LAN 4 automatically becomes an EWAN port when EWAN internet interface is being selected
in the GUI.
: Connect to Fiber/ Cable/ xDSL Modem with a RJ-45 cable, for broadband connectivity.
Connect the device to an ADSL/VDSL telephone jack or splitter using the supplied RJ-11
telephone cable in the package.
Locate on the bottom of the 7700N
Push and hold the reset button for five (5) seconds to restore to its factory default settings (this
is used when you cannot login to the router, e.g. forgot your password)
Product Overview
MEANING
9