The Front Leds - BEC 7800 User Manual

The Front LEDs.

LED
1 Internet
2 DSL
EWAN
3
Ethernet port
4
1X —
(RJ-45 connector)
5 Power
Lit red when WAN port fails to get IP address.
Flash green when WAN port gets IP address successfully and when
data is transmitted.
Lit Green when the device is successfully connected to an ADSL
DSLAM. ("line sync").
Lit when connected to a broadband connection device.
Lit orange for 10/100Mbps.
Blinking when data is Transmitted / Received.
Lit when one of LAN ports is connected to an Ethernet device.
Lit green when the speed of transmission hits 1000Mbps; Lit orange
4X
when the speed of transmission hits 10/100Mbps.
Blink when data is being Transmitted / Received.
When the power is plugged in, it will lit Red. When the system is
ready, it will lit Green. While the system is rebooting or during
firmware upgrade, the LED light will flash.
Meaning
6