How To Lubricate Each Part - OREC AHRC 663 Operating Instructions Manual

How to Lubricate Each Part

 Be sure to lubricate each part with grease or lubricating oil (SAE 30) every 30 hours.
Operation will become difficult and the machine could be damaged if you n eglect lubrication and
allow oil to run out.
Steering clutch cable
Blade clutch cable
change cable
Inside the handle bonnet
Front wheel shaft（ grease）
Handlebar up/down cable
27
Steering clutch cable
Brake cable
Drive clutch cable
Crawler shafts (grease)