OREC AHRC 663 Operating Instructions Manual page 2

Getting Started
Thank you for purchasing this machine. These instructions explain the correct and easy way to always
keep this machine in fine working order and operate it safely.
Please read these instructions fully before using this machine in order to understand the safest, most
efficient way of operating it, and the correct way to maintain it.
Please keep these instructions in a safe place where they can be easily referred to at any time. We hope
you will use this machine for many years to come.
Please understand that ongoing enhancements in quality and performance, and other possible parts
improvements may cause the actual machine to vary slightly from what is described in these instructions.
Machine Regulations
This machine is designed to cut overgrown weeds and brush, it is not a lawn mower. Therefore it can not
offer the same quality cut as a finishing mower. This machine is designed for agricultural areas and is
intended for commercial users.
Definitions and Symbols
In these instructions, the following signs and definitions are used to indicate the level of danger that exists.
Please obey the following warnings and have a full understanding of the meaning of the symbols.
Symbol
Displayed when failure to obey instructions can result in death or serious injury.
Displayed when there is a danger of death or serious injury.
Displayed when failure to obey instructions can result in injury, or when not
attending to the machine and correcting it can also result in injury.
Displayed when it is important to know about operation and maintenance specific
to this machine, or at times when misunderstanding and mistakes are common.
Definition
1