OREC AHRC 663 Operating Instructions Manual page 25

2
1
tri
ctl
y
pr
3
oh
ibi
te
d.

How to stop
 If you need to leave the machine unattended, be sure to switch the engine off , put the speed
change lever in the [N] position and confirm that the parking brake is ON. Accidents and
damage can be caused by an unattended machine running out of control.
5. Turn the throttle lever [1] to the [
clutch lock lever [2], and gently raise the blade clutch lever [3] to the
[ON] position.
The engine may stall if you pull the blade clutch lever up
up suddenly.
 Use extreme caution as the blades are now rotating.
6. Gently grip the drive clutch lever together with the handlebar and
start work.
1. Release your grip on the drive clutch lever [OFF] and allow the
machine to stop. The parking brake is automatically engaged at the
same time. The blades stop rotating after 3 to 5 seconds.
2. Stop the engine.
Refer to 'How to stop the engine' (page 19).
24
(HI)] position, grip the blade