S E T U P - CHAINTECH 7NJS Ultra User Manual

Midi Port IRQ:
This item specifies an IRQ for the Midi port.
（4） Init Display First:
This function allows user to choose between [Onboard / AGP] or [PCI
Slot] to initialize Display first.
（5） OnChip USB:
Enable the on-board Universal Serial Bus (USB V1.1 or V2.0) controller if
you want to connect a USB device to your system. Note that if this setting is
disabled, you can still temporarily use a USB keyboard during boot up so that
you can enter BIOS and enable this setting. If you pass the boot up stage
without enabling this function, your PS/2 keyboard will no longer work.
Available options are [Disabled], [V1.1+V2.0], and [V1.1].
（6） USB Keyboard Support:
Select Enabled if your system has a USB keyboard installed on the system
board. If your system has no USB keyboard, select Disabled in this field.
（7） On Chip 1394:
Select [Auto] if your system has an IEEE 1394 device installed on the system
board
3.5 Power Management Setup
This section provides information on the Green PC power management
functions. By choosing the Power Management Setup option from the CMOS
Setup Utility menu (Figure 3-1), the screen below is displayed. This sample
screen contains the manufacturer's default values for the motherboard
Figure 3-6 Power Management Setup
7NJS Ultra User's Guide
Chapter 3
43