Chapter 1 Introduction; Product Specifications - CHAINTECH 9BJF2 User Manual

Chapter 1
Introduction

1-1 Product Specifications

Processor
- Supports Intel Pentium 4 Socket 478 processors
- Supports 400/533MHz (Internal System Bus)
Chipset
- Intel 845G + ICH4 chipset
DRAM Memory
- Two 184-pin DDR DIMM supports up to 2GB
- Supports PC1600/PC2100 DDR SDRAM
Expansion Slots
- One AGP slot for 4XAGP at 1.5v (v2.0 compliant) or ADD (optional) adapter
supports DFP and NTSC/PAL TV system
- Six 32-bit PCI slots (Rev 2.2 compliant)
- One CNR slot for modem, audio and LAN riser
This motherboard supports only 1.5v AGP electricals. AGP card using 3.3v
or other voltages may result in system boot up failure, malfunction, etc.
Boot-Block Flash ROM
- Award BIOS, supports PnP, APM, DMI, ACPI & Multi-device booting
features i.e. floppy, LS120, CD/DVD-ROM, HDD(IDE, SCSI), ZIP-ATAPI etc.
Embedded Ultra DMA-100 PCI IDE controller
- Supports two IDE ports up to 4 ATAPI devices
- Supports up to PIO Mode 4 up to 16.6MBps, Multi Mode 4 up to 66MBps
and Multi Word Mode 5 up to 100MBps with bus mastering
- Bus Mastering software drivers for common multi-task operating systems
On-board ITE 8712F I/O Controller
- Two UARTs support two serial ports and IR function for HPSIR and ASKIR
- One parallel supports SPP/ECP/EPP
- One floppy disk drive connector supports up to 2.88MB
- Integrated smart card reader function and interface
Embedded
USB 2.0 Controller
- EHCI compliant USB host controller with Root Hub
- Support up to six USB ports (EHCI/UHCI v1.I compatible)
Fast Ethernet /Home NetworkingController
- On-board LAN chip RTL8100B supports 10/100Mbps or 1/10Mbps Home PNA 2.
0
Introduction
1