CHAINTECH 7NJS Ultra User Manual page 103

FastBuild (tm) Utility 2.xx (c) 2002-2005 Promise Technology, Inc.
Array No
Array 1
Array 2
Array 3
Array 4
1. To delete an array, highlight the Array you wish to delete and press the [Del]
key.
2. The View Array Definition menu will appear (see below) showing which
drives are assigned to this array.
FastBuild (tm) Utility 2.xx (c) 2002-2005 Promise Technology, Inc.
Array No
Array 1
Stripe Block: 64 KB
Channel:ID Drive Model
1 : Master
2 : Master
3. Confirm yes to the following warning message with the [Ctrl-Y] key to
continue array deletion:
Are you sure you want to delete this array?
Press Ctrl-Y to Delete, others to Abort
4. After deleting the array, you should create a new array using Auto Setup or
the Define Array menu from the FastBuild Main Menu.
[ Delete Array Menu ]
RAID Mode
Stripe
——
——
——
[ Keys Available ]
[↑] Up [↓] Down
[ Define Array Menu ]
RAID Mode Total Drv
—— ——
[ Drive Assignments ]
QUANTUMCR8.4A
QUANTUMCR8.4A
Total Drv Capacity(MB)
2 16126
—— ——
—— ——
—— ——
[ESC] Exit [Del] Delete
Capacity(MB)
——
Capacity (MB)
8063
8063
Serial ATA/IDE RAID
Status
Functional
——
——
——
Status
——
Assignment
Y
Y
97