Explanation Of Buttons - Skyrc IMAX B6 V2 Instruction Manual

Explanation of Buttons

BATT PROG / STOP Button:
It is used to stop the progress or go back to previous step/screen
DEC Button:
It is used to go through the menus and decrease the parameter value
INC Button:
It is used to go through the menus and increase the parameter value
ENTER / START Button:
It is used to enter parameter or store parameter on screen.
When you are willing to alter the parameter value in the program,
press the START/ENTER button to make it blink then change the
value by pressing DEC and INC button. The value will be stored by
re-pressing the START/ENTER button. If there is another parameter
can be altered in the same screen, when you confirm the first
parameter value, the next parameter value will start to blink which
means it is ready to alert.
When you are willing to start the progress, press and hold the
START/ENTER button for 3 seconds. When you are willing to stop the
progress or go back to previous step/screen, press the BATT
PROG/STOP button once.
When you power on the charger, it will enter LiPo Battery balance
program directly. You could change the mode (balance mode, normal
charge mode, fast charge mode, store mode or discharge mode),
enter the desired charging/discharging mode, set the referred
parameter and start the progress.
If you have no request for LiPo Battery program, please press the
BATT PROG/STOP button to enter BATT PROGRAM screen.
· 10
1. Connecting to power source
12V DC Battery / Power Adapter Output DC 11-18V
B6 V2 B6 V2
Power and Battery Connection
4S LiPo Battery Pack
or 12V Pb Battery
11-18V
Adapter
STOP STATUS START
STOP STATUS START
11 ·