Explanation Of Buttons - Skyrc T100 Instruction Manual

BATT/PROG
Stop
BATT PROG / STOP Button:
It is used to stop the progress or go back to previous step/screen
DEC Button:
It is used to go through the menus and decrease the parameter value
INC Button:
It is used to go through the menus and increase the parameter value
ENTER / START Button:
It is used to enter parameter or store parameter on screen.
CHANNEL Button:
It is used to switch from Channel A to B or vice versa.
When changing a parameter value in the program, press the START/ENTER button to
make it blink, then change the value by pressing the DEC and INC button. The value will
be stored by repressing the START/ENTER button. If there is a second parameter to edit
on the same screen, it will begin blinking after you confirm the first parameter value.
When starting the progress, press and hold the START/ENTER button for 3 seconds.
When stopping the progress or go back to previous step/screen, press the BATT
PROG/STOP button once.
When you first power the charger on it displays the last processes used. From here you
can change the battery type or press enter to change the charge process, charge current
rate and/or battery cell count, If you are charging a battery identical to the last one used
and want to perform the same process then simply press the start to begin that process.
T100
DEC INC ENTER

EXPLANATION OF BUTTONS

Start
09 ·