Table of Contents
Advertisement
AFC 18 - AFC 24 - AFC 30
6
5.7
Installing the outside sensor
09/07/2015 - 300026439-07
6. Tilt the control panel.
7. Unfasten the 2 clamping collars on the air connection to dismantle
0 80
8
8. Put the flue gas evacuation pipe in place.
7
7
C003156-G
n Adapting the boiler to bottom outlet
¼Refer to the instructions delivered with the package MV9
5.7.1.
It is important to select a place that allows the sensor to measure the
outside conditions correctly and effectively.
Advised positions:
4 on one face of the area to be heated, on the north if possible
4 half way up the wall in the room to be heated
4 under the influence of meteorological variations
4 protected from direct sunlight
4 easy to access
it.
WARNING
The boiler must be adapted to switch to a single flow
configuration (air/flue gas connection type B
(combustive air taken from the boiler room).
Choice of the location
5. Installation
- B
)
23
23P
57
Advertisement
Table of Contents
